1 Pot System
The 1Pot System is a single pot system. The system comes supplied with a tray that accommodates a 15 ltr pot, a Marix disc that it placed inside the pot; the Marix disc is used to prevent soil/compost from leaving the pot & a Root Control Disc that is placed under the pot in the tray cavity, gold face up. The Root Control Disc or RCD will prevent roots from leaving the pot and discourage them from heading towards the AQUAvalve, an AQUAvalve which controls the water supply & 1.5 meters of 6mm pipe that supplies the water to the system are also supplied.
|
|
RULE OF THUMB: Always raise your tank to a minimum of 150mm above the highest AQUAvalve and re-fill the tank when there is approximately a third of the solution left. Tanks & filters sold separately.
| 1 Pot System maintainence sheet (.pdf) |
1Pot Kit: Ref AP200/SQ/1 Typical layoutA single 1Pot System supplied by a 30 litre tank (Everything is contained in the tank)Contents:• 1x 30ltr Tank, lid & 6mm Top Hat Grommet |
![]() |
2Pot Kit: Ref: AP200/SQ/2 Typical layout below
2x Single 1Pot Systems supplied by a 47 litre tank (Everything is contained in the tank)
Contents:• 1x 47ltr Tank, lid & 6mm Top Hat Grommet |
|
3Pot Kit: Ref: AP200/SQ/3 Typical layout below
3x Single 1Pot Systems supplied by a 47 litre tank (Everything is contained in the tank)|
|
Contents:• 1x 47ltr Tank, lid & 6mm Top Hat Grommet |
6Pot Kit: (Using 6mm pipe) Ref: AP200/SQ/6 Typical layout below
6x Single 1Pot Systems supplied by a 100 litre Space Saver Water Butt|
|
12Pot Kit: (Using 16mm pipe) Ref: AP200/SQ/12 Typical layout below
12x Single 1Pot Systems supplied by a 220 litre Water Butt (Everything is contained in the tank)|
|
24Pot Kit (Using 16mm pipe) Ref: AP200/SQ/24 Typical layout below
24x Single 1Pot Systems supplied by a 350 litre Water Butt (Everything is contained in the tank)|
|
| Jump to the top |
| Copyright © 2009-2010 AutoPot - www.autopot.co.uk. All Rights Reserved. Site Design - a-amos. Administration. |